Tipco Engineering
Tipco Global

Disperser Series

Disperser Series machines are built for rapid wetting, blending and dispersion of colour paint, ink, dye, adhesive and ceramic glaze, customized to your material's viscosity and process requirement.

6 products found
High Speed Disperser (HS)
High Speed Disperser (HS)
The Tipco High Speed Disperser wets powders into liquid and breaks up lumps in batches from 75 to 1,500 litres. A hydraulic lift lowers the cowl impeller into the tank, a clamp holds the tank steady, and a VFD sets the shaft speed from 0 to 1440 rpm. Standard models run from 5 to 50 HP with a flameproof or non-flameproof panel, and larger fixed-tank and hanging builds go up to 60 HP.
High Speed Disperser with Hydraulic Lifting and Gripper
High Speed Disperser with Hydraulic Lifting and Gripper
The High Speed Disperser with Hydraulic Lifting and Gripper is built for high-volume production lines where vessels change frequently. The hydraulic lift raises and lowers the disperser head smoothly, while the gripper mechanism holds the mix vessel firmly in place during operation, keeping the blade positioned accurately for consistent dispersion quality. Together, this combination cuts the time needed to swap vessels between batches, which matters most on lines running multiple products or colours through the same station in a single shift. Builds quoted for 1,000 L and 1,500 L batches run at 600 to 1,200 rpm through a VFD, with flameproof motors and an explosion-proof control panel.
High Speed Disperser with Multi Shafts
High Speed Disperser with Multi Shafts
The Multi Shaft disperser puts a high-speed cowl disperser and a slow-speed anchor or scraper in the same tank, each with its own drive. The disperser wets out the powders while the slow shaft keeps the whole batch moving and clears the wall. It is built to order in jacketed tanks from 500 L to 5 KL, with SS316 contact parts, heating or cooling to 80 °C, and flameproof or standard drives.
Vacuum High Speed Disperser
Vacuum High Speed Disperser
Vacuum High Speed Disperser uses a closed design to prevent solvent volatilisation and can be vacuumised to remove bubbles generated during production, with material charged directly through vacuum for easier operation. The removable, mirror-polished tank is easy to clean, with scraper, twin or butterfly blade configurations available. The disperser head rises and falls on a hydraulic lift, and a VFD sets the shaft speed from 0 to 1440 rpm.
Twin Shaft Disperser with Hydraulic
Twin Shaft Disperser with Hydraulic
Twin Shaft Disperser integrates a low-speed strong mixer with a high-speed disperser in one machine, ideal for mid to high viscosity and thixotropic materials. Dispersing and mixing happen simultaneously, with various agitator types available to match your material’s property and production requirement. We have quoted builds from 500 to 3,000 litres, with high-speed motors from 20 to 75 HP, and our 500 L build is quoted for 5,000 to 25,000 cP.
Twin Shaft Disperser - Hanging
Twin Shaft Disperser - Hanging
The Tipco Hanging Twin Shaft Disperser puts a high-speed cowl disperser and a slow-speed scraper agitator over a large fixed tank, for thick, heavy and thixotropic batches of 2.5 to 5 KL. Dispersing and mixing happen together in one vessel, and the scraper keeps the whole batch moving, so a tank too large to move can still be charged, dispersed and discharged in place. Quoted at 2.5, 3.5 and 5 KL.
Chat on WhatsApp