Tipco Engineering
Disperser Series

High Speed Disperser with Multi Shafts

The Multi Shaft disperser puts a high-speed cowl disperser and a slow-speed anchor or scraper in the same tank, each with its own drive. The disperser wets out the powders while the slow shaft keeps the whole batch moving and clears the wall. It is built to order in jacketed tanks from 500 L to 5 KL, with SS316 contact parts, heating or cooling to 80 °C, and flameproof or standard drives.

Major Features

  • High-speed dispersion shaft paired with a low-speed anchor or sweep shaft
  • Independently driven, independently controlled shaft speeds
  • Anchor shaft fitted with scrapers for continuous wall clearance
  • Variable frequency drive for precise control of the high-speed shaft
  • Fixed tank-mounted, with hydraulic lifting as an option
  • SS316 contact parts on a painted MS frame
  • Jacketed tank for heating or cooling up to 80 °C
  • Available in stainless steel or carbon steel construction
  • Variable frequency drive for precise control on each shaft
  • Jacket for heating or cooling up to 80 °C
  • Flameproof drives for solvent-based batches
  • Configurable as dual shaft, triple shaft, or with a rotor-stator as the third shaft

Benefits

  • Handles medium to very high viscosity materials a single-shaft disperser cannot process
  • Removes dead zones and stagnant product near the vessel wall
  • Anchor scraper action improves heat transfer and keeps batch temperature steady
  • Lowers the risk of overheating around the high-speed blade during long runs
  • Improves product uniformity by feeding material continuously into the high-shear zone
  • Combines mixing and dispersion in one machine, saving floor space and cost
  • Built, serviced and supplied with spares from Sonipat

Technical Information

Specification

500 L jacketed build

5 KL build

Batch

500 L working, 600 L gross

5,000 L

High-speed shaft

Cowl disperser, 1 or 2 blades, 1400 rpm

High-speed cowl disperser

Disperser motor

10 HP, flameproof, with VFD

Set to the batch at design stage

Slow-speed shaft

Wall scraper

Anchor agitator

Slow-speed motor

1 HP, flameproof

Set to the batch at design stage

Powder feeding

Through nozzles on the lid

Powder induction system, dust extraction

Contact parts

SS316 tank

SS316

Frame

Fixed legs

MS painted

Jacket

SS304 jacket for thermic fluid, up to 80 °C

Limpet jacket, up to 80 °C, 2 to 3 kg/cm², rockwool insulation with SS cladding

Mounting

Fixed on a closed tank, mechanical seal

Fixed on the tank, hydraulic lifting optional

Discharge

Bottom outlet

Pumped discharge

Control

Panel with VFD and temperature display

PLC with HMI

Motors

Flameproof

Standard, IE3

Batch quoted for

Solvent-based resin colours, up to 2,000 cP

Powder to liquid 30:70, 100 to 600 cP

Tell us what you're building — we'll tell you what it takes to make it.

Our engineering team is ready to help you find the right solution for your application.

Contact Us Download Catalogue
Chat on WhatsApp