Tipco Engineering
Lab Series

Lab Bead Mill

Tipco lab bead mills let you grind a formulation at bench scale before you commit to a production mill. The LBM-0.1 is a jacketed batch mill for 800 ml to 1 L, with impeller rods on a 25 mm shaft and a 1 HP flameproof motor. The THM-1 is a lab horizontal bead mill with a 1 L chamber, 0 to 1400 rpm by VFD and a feed of 100 to 400 ml per minute.

Major Features

  • LBM-0.1 designed for batch sizes ranging from 800 ml to 1 L, featuring a jacketed SS304 vessel.
  • LBM-0.1 equipped with impeller rods mounted on a 25 mm shaft and a 1 HP flameproof motor.
  • THM-1 features a 1 L jacketed grinding chamber made of hard alloy with a hardness rating of HRC 62.
  • THM-1 equipped with four hardened steel discs, offering variable speed control from 0 to 1400 rpm through a VFD.
  • Tungsten carbide dynamic separator for efficient grinding media separation.
  • Gear feed pump with an independent VFD, offering a flow rate of 100–400 ml/min.
  • MS cooling jackets provided on both mills.
  • Lab vessels ranging from 2 L to 5 L, along with bead mill shafts for laboratory mixers.

Benefits

  • Test grinding performance using small batches of 1 L of material instead of committing to a full production batch.
  • Evaluate different grinding media sizes and loadings before scaling up to production.
  • THM-1 replicates the working principle of a production horizontal bead mill for reliable laboratory trials.
  • Cooling jackets help maintain controlled temperatures when processing heat-sensitive materials.
  • Flameproof motors ensure suitability for solvent-based trials.
  • Variable speed and feed rate controls provide repeatable and consistent test conditions.
  • Upgrade existing laboratory mixers with bead milling capabilities using our dedicated shafts and vessels.
  • Built, serviced, and supplied with spares from Sonipat.

Technical Information

Model: LDM

Specification

LBM-0.1 (batch)

THM-1 (horizontal)

Lab vessels and shafts (for lab mixers)

Capacity

800 ml to 1 L (max)

1 L gross chamber; 100 to 400 ml/min

2 L vessel: 2 L working. 5 L vessel: 5 L working

Drive motor

1 HP, 3 ph, 1440 rpm, flameproof

3 HP (2.2 kW), 1420 rpm, flameproof

Your lab mixer drives the shaft

Speed

On request

0 to 1400 rpm by VFD

Not applicable

Grinding element

Impeller rods

Hardened steel discs, 4 nos

2-disc shaft: discs 70 or 85 mm dia, 5 mm thick. 3-disc shaft: discs 100 mm dia, 5 mm thick

Shaft

25 mm

On request

25 mm, SS304

Chamber or vessel

Jacketed vessel, 3 mm shell, 4 mm bottom

Hard alloy HRC 62, jacketed

2 L: 135 x 175 mm. 5 L: 180 x 220 mm. SS304, 2 mm, mirror finish, jacketed

Contact parts

SS304

SS304

SS304

Jacket

MS, cooling

Jacketed chamber

Jacketed vessel

Separator

Not applicable

Tungsten carbide dynamic separator

Not applicable

Seal

On request

Mechanical seal with independent cooling

Not applicable

Feed pump

Not applicable

Gear pump, 0.5 HP, VFD

Not applicable

Inlet / outlet

On request

ID 20 mm, SS

Not applicable

Filtration

Not applicable

Not applicable

Filtration unit, with or without stand

Control

On/off push button remote panel and VFD panel (non-flameproof panel)

Panel with interlocks and VFD

Not applicable

Grinding media

Buyer scope

Zirconium 0.8 to 2 mm (1 to 1.2 mm suggested), buyer scope

Buyer scope

Tell us what you're building — we'll tell you what it takes to make it.

Our engineering team is ready to help you find the right solution for your application.

Contact Us Download Catalogue
Chat on WhatsApp